Temperature relay-sensors ТАМ-102С | PAO Saransk Instrument Works

Temperature relay-sensors ТАМ-102С

Manufacturer: PAO SARANSK INSTRUMENT WORKS
or send an application for spz@saranskpribor.ru
Documents

Свидетельство о типовом одобрении Морского регистра судоходства

Паспорт на Датчик-реле температуры ТАМ-102С

Декларация ТР ТС ТАМ-102С ТАМ-103С

Руководство по эксплуатации

Pressure switches ДЕМ-102С, ДЕМ-105С (hereinafter – devices) are intended for monitoring and regulating the temperature of liquid and gaseous media in refrigeration plants used in railway and motor transport, vessels as well as stationary refrigeration plants and other devices.

Controlled medium is air, freons, oils, fresh water and other media not leading to corrosion of device part materials, copper and copper alloys, lead-tin solder, silver brazing alloys, steels contacting with them.

Devices are fit for operation under conditions established for versions УХЛ3, В2,5 as per GOST 15150-69.

General specifications

1. Device designation, specified setpoint range, basic absolute error, actuation range and threshold return area value of devices are in compliance with those given in Table 1.


 

Table 1

Device designation

Setpoint range, °С

Capillary length (pipe remotability)

Basic error at numerical and reference marks, °С, maximum

Return area uncontrollable, °С, maximum

Actuation range, °С, maximum

ТАМ-102С-1(2)-1-1

+5 to +35

1.5

±1.5

6

1

ТАМ-102С-1(2)-1-2

2.5

ТАМ-102С-1(2)-1-3

4

ТАМ-102С-1(2)-2-1

 

+30 to +60

1.5

8

ТАМ-102С-1(2)-2-2

2.5

ТАМ-102С-1(2)-2-3

4

ТАМ-102С-1(2)-3-1

+55 to +100

1.5

±3.0

10

ТАМ-102С-1(2)-3-2

2.5

ТАМ-102С-1(2)-3-3

4

ТАМ-102С-1(2)-4-1

 

+10 to +60

1.5

8

ТАМ-102С-1(2)-4-2

2.5

ТАМ-102С-1(2)-4-3

4

ТАМ-102С-1(2)-5-1

 

+50 to +130

1.5

10

ТАМ-102С-1(2)-5-2

2.5

ТАМ-102С-1(2)-5-3

4

ТАМ-102С-1(2)-6-1

 

+50 to +130

1.5

ТАМ-102С-1(2)-6-2

2.5

ТАМ-102С-1(2)-6-3

4

ТАМ-102С-1(2)-7-1

-20 to +10

1.5

±2.0

8

ТАМ-102С-1(2)-7-2

2.5

ТАМ-102С-1(2)-7-3

4

ТАМ-102С-1(2)-8-1

-35 to -5

1.5

ТАМ-102С-1(2)-8-2

2.5

ТАМ-102С-1(2)-8-3

4

Notes
1. Setting the device to a specific actuation setpoint shall be done by the manufacturer in compliance with the order.
Setpoint value shall be selected from the setpoint range in increments of 10С.
2. If the order does not specify an actuation setpoint, devices shall be set by the manufacturer to the minimum setpoint value within the appropriate specified setpoint range.
3. The customer is allowed to reset a setpoint within the range of values specified in Table 1. – page 29 of the Catalog

2. Maximum allowable temperature of the controlled medium for the devices is given in Table 2.


 

Table 2

Device designation

Setpoint range, °С

Maximum allowable temperature of the controlled medium, °С

ТАМ-102С-1(2)-1

plus 5 to plus 35

plus 70

ТАМ-102С-1(2)-2

plus 30 to plus 60

plus 85

ТАМ-102С-1(2)-3

plus 55 to plus 100

plus 130

ТАМ-102С-1(2)-4

plus 10 to plus 60

plus 85

ТАМ-102С-1(2)-5

plus 50 to plus 130

plus 145

ТАМ-102С-1(2)-6

plus 50 to plus 130

plus 145

ТАМ-102С-1(2)-7

minus 20 to plus 10

plus 45

ТАМ-102С-1(2)-8

minus 35 to minus 5

plus 40

3. Devices are designed for operation at contact loads specified in Table 3.

Table 3

Current type

Voltage, V

Switching power, W

Current, A

Сos ϕ, as minimum

Frequency, Hz

min.

max.

DC

12 to 24

60

0.1

AC

127; 220

0.1

6

0.6

50 or 60

Notes
1 Minimum value of switched current is 0.1 A with maximum inductance for DC of 5 mH.
2 It is not allowed to use devices for switching minimum currents if they were used at other current loads. –page 29 of the Catalog

4. The devices are resistant to and preserve parameters under conditions of operating decreased temperature of minus 10°C and operating increased temperature of plus 55°C of ambient air.

5. As to dust or water ingress protection, devices are of version IP64 as per GOST 14254-96.

6. Weight of the device is 1.3 kg as maximum.

Designation structure 

ТАМ-102С

Note
1 – EN 175301-803 form А connectors and ШР type are installed on devices with climatic version УХЛ3, 2РТТ type on devices with climatic version В2,5;
2 – rated values of climatic factors for operation of devices in operating condition – as per GOST 15150-69 for version В, category 2, but the value of ambient air humidity is assumed to be the same as for category 5.
3 – supplied as an option;
4 – when several installation kits are ordered, comma separation is allowed. – page 30 of the Catalog

Ordering information for ТАМ-102С devices:

1) temperature relay-sensor ТАМ-102С, return area directed towards decrease of temperature in relation to the setpoint, with setpoint range from 55 to100°С, with capillary pipe length of 2.5 m, with 2РТТ type electrical connector, climatic version В2,5, setpoint at 70°С, with installation kit К1:
“Temperature relay-sensor ТАМ-102С-2-3-2-3, В2,5, setpoint 70°С, К1 ТУ 4218-144-00227471-2012”.


 

2) idem, if a setpoint actuation value is not specified in the order
“Temperature relay-sensor ТАМ-102С-2-3-2-3, В2,5,К1ТУ 4218-144-00227471-2012”.

3) temperature relay-sensor ТАМ-102С, return area directed towards decrease of the temperature in relation to the setpoint, with setpoint range from 30 to 60°С, with capillary pipe length of 2.5 m, with 2РТТ type electrical connector, climatic version В2,5, setpoint at 50°С, with installation kits К1, К4:
“Temperature relay-sensor ТАМ-102С-2-2-2-3, В2,5, setpoint 50°С,К1,К4 ТУ 4218-144-00227471-2012”.

4) temperature relay-sensor ТАМ-102С, return area directed towards increase of the temperature in relation to the setpoint, with setpoints range from 50 to 130°С, with capillary pipe length of 4 m, with ШР type electrical connector, climatic version УХЛ3, for export, setpoint at 50°С, with installation kit К2:
“Temperature relay-sensor ТАМ-102С-1-5-3-2, УХЛ3,Э, setpoint 50°С, К2 ТУ 4218-144-00227471-2012”.– page 31 of the Catalog

Overall and mounting dimensions 

ТАМ-102С

Figure 1 – Overall and mounting dimensions of ТАМ-102С temperature relay-sensors with setpoint range “1”, “2”, “3”, “7”, “8” 

ТАМ-102С

Figure 2 – Overall and mounting dimensions of ТАМ-102С temperature relay-sensors with setpoint range “4”, “5”, “6” 

ТАМ-102С

Figure 3 – Overall and mounting dimensions of ТДМВ-102 temperature relay-sensors with К1 kit 

ТАМ-102С

Figure 4 – Overall and mounting dimensions of ТДМВ-102 temperature relay-sensors with К2 kit

Electric circuit diagram 

ТАМ-102С

Connector designation

Document designation

ХР1

XS1

Base as per EN 175301-803

Electric connector GDA4080S62 form А

EN175301-803

Plug ШР20П3Ш7

Socket ШР20П3НШ7

ГЕ0.364.107ТУ

Plug 2РТТ20Б3Ш5В

Socket 2РТТ20КПН3Г5В

ГЕ0.364.120ТУ

Figure 5 – Electric circuit diagram of ТАМ-102С temperature relay-sensors